Beschreibung
PTO Shaft Overrunning Clutch – RAS2 Series (with Splined Shaft)
Der PTO Shaft Overrunning Clutch – RAS2 Series (with Splined Shaft) ist von Premiumqualität overrunning clutch Speziell entwickelt für Zapfwellenantriebe (PTO), die in Land-, Industrie- und Forstmaschinen eingesetzt werden. Auch bekannt als Zapfwellen-Rutschkupplung, Sicherheitskupplung der Zapfwelle, oder Überlastschutz für TraktorzapfwelleDieses Gerät schützt Ihre teuren Anlagen vor Schäden durch plötzliche Drehmomentüberlastungen, Blockaden und Betriebsstörungen.
Verfügbare Modelle: RAS2
Drehmomentbereich: Drehmoment: 3500 Nm
Spline-Optionen: 1 3/8″ Z6 (female & male)
Hauptkomponenten: Circlip, Retaining washer, Push pin kit, Hub, Prong kit (Qty.=3), Housing with splined shaft, Grease nipple
Technische Daten und Abmessungen
| Serie | Maximales Drehmoment (Nm) | Spline (female) | Spline (male) | A (mm) | B (mm) | C (mm) |
|---|---|---|---|---|---|---|
| RAS2 | 3500 | 1 3/8″Z6 | 1 3/8″Z6 | 161 | 21 | 38 |
Alle Maße in Millimetern. Drehmomentwerte in Newtonmetern (Nm). Die Keilwellenspezifikationen entsprechen den ISO/ASAE-Normen. Für kundenspezifische Konfigurationen kontaktieren Sie uns bitte.
Hauptmerkmale und Vorteile
🔧
Einfache Wartung und Instandhaltung
Die einfache modulare Bauweise ermöglicht schnelle Servicearbeiten vor Ort mit Standardwerkzeugen. Ersatzteile sind problemlos erhältlich und kostengünstig.
🏭
Materialien in Industriequalität
Präzisionsgefertigt aus gehärtetem legiertem Stahl mit wärmebehandelten kritischen Oberflächen für maximale Haltbarkeit und Lebensdauer.
🛠
Universelle Nebenantriebskompatibilität
Die standardmäßige 1 3/8″ Z6-Keilwellenaufnahme passt ohne Adapter oder Modifikationen auf alle gängigen Zapfwellen von Traktoren und Anbaugeräten.
⛳
Sealed & Protected Design
Grease-lubricated internals with dust seals protect against contamination in harsh agricultural environments.
📈
Wide Torque Selection Range
Available in multiple torque ratings (3500 Nm) to match virtually any PTO-driven implement requirement.
⚖
Safety Certified
Manufactured under ISO 9001:2015 quality management with CE marking for European and international compliance.
Funktionsweise – Funktionsprinzip
The overrunning clutch (also known as a freewheel clutch) allows the output shaft to rotate freely in one direction while transmitting full torque in the other. Inside the housing, spring-loaded prongs engage with a ratchet surface on the hub. When the input shaft drives the output shaft in the intended direction, the prongs lock into the ratchet teeth and transmit power. When the output shaft attempts to overdrive the input (such as when a tractor PTO is disengaged while a heavy flywheel implement is still spinning), the prongs disengage and the output freewheels. This prevents dangerous back-drive forces from traveling through the PTO shaft to the tractor transmission, protecting both equipment and the operator.
Zurücksetzen-Methode: Automatic — continuous engagement/disengagement
Am besten geeignet für: Implements with high rotational inertia (mowers, balers, flail choppers) requiring back-drive protection
Typische Anwendungsszenarien in der Landwirtschaft
Rotationsmäher und Schlegelmäher
Schützt das Getriebe des Mähwerks vor Beschädigungen, wenn die Messer auf versteckte Steine, Baumstümpfe oder Metallteile treffen. Der Drehmomentbegrenzer absorbiert die Stoßbelastung und verhindert, dass sie die Zapfwelle des Traktors erreicht.
Heuballenpressen & Rundballenpressen
Verhindert Schäden am Ballenpressmechanismus bei der Zuführung von Pressgut, bei Fehlern in der Garnwicklung oder beim Eindringen von Fremdkörpern, indem der Antriebsstrang getrennt wird, bevor schädliche Drehmomentwerte erreicht werden.
Rotationsfräsen und Kultivatoren
Schützt das Getriebe der Bodenfräse und die Zapfwelle des Traktors, wenn die Zinken auf vergrabene Steine, Wurzeln oder verdichtete Bodenschichten treffen, die extreme Drehmomentspitzen erzeugen können.
Manure Spreaders
Protects the beater mechanism and gearbox from overload when encountering frozen clumps, foreign objects, or uneven material distribution in the hopper.
Feed Mixers & TMR Wagons
Safeguards the mixer auger drive from damage caused by twine wrap, frozen feed blocks, or excessive loading that generates torque beyond design limits.
Vergleich der Drehmomentbegrenzer-Typen
| Besonderheit | Kugelarretierung | Reibscheibe | Scherbolzen | Sperrklinke | Automatik (Nockenwelle) |
|---|---|---|---|---|---|
| Drehmomentbereich | Niedrig bis mittel | Mittel bis hoch | Niedrig bis sehr hoch | Niedrig–Hoch | Mittel bis hoch |
| Geschwindigkeitsbereich | 540–1000 U/min | 540–1000 U/min | 540–1000 U/min | 540–1000 U/min | 540–1000 U/min |
| Reset-Methode | Automatisch | Automatik (Schlupf) | Anleitung (Schraube ersetzen) | Automatisch (Ratsche) | Automatisch (Nockenwelle) |
| Beste Anwendung | Leichte Geräte | Häufige, mäßige Überlastungen | Seltene schwere Überlastungen | Häufige kurzzeitige Überlastungen | Hohe Auslastung, keine Verbrauchsmaterialien |
| Verbrauchsmaterialien | Keiner | Friction linings (long life) | Shear bolts | Keiner | Keiner |
| Torque Precision | Moderate | Good (adjustable) | Excellent (bolt-grade calibrated) | Good | Very Good (adjustable) |
Installation & Usage Guide
Installation Steps
Step 1: Verify that the PTO shaft spline size matches the torque limiter spline specification (1 3/8″ Z6 (female & male)). Clean all spline surfaces thoroughly.
Step 2: Slide the torque limiter onto the PTO shaft spline, ensuring full engagement. Secure with the provided push pin kit or retaining hardware.
Step 3: Connect the output side (yoke or splined shaft) to the implement input shaft or gearbox. Ensure proper alignment and secure all fasteners to the recommended torque.
Step 4: Apply grease through the grease nipple to lubricate the spline interface and internal components. Use lithium-based EP grease (NLGI #2).
Step 5: Perform a low-speed test run to verify correct engagement and smooth operation before full-power operation.
Safety & Maintenance Tips
⚠ Always disengage the tractor PTO before inspecting or servicing the torque limiter.
⚠ Use only genuine replacement parts specified for your series to maintain the correct torque rating.
⚠ Re-grease spline connections every 8 operating hours or as specified in your equipment manual.
⚠ Inspect for wear, cracks, or damage before each season. Replace worn components immediately.
⚠ Never operate with damaged or missing PTO shaft safety shields.
Selection Guide — Choosing the Right Model
Selecting the correct torque limiter requires confirming the following parameters:
✓ Required Torque Rating (Nm): Match the implement’s maximum operating torque plus a 20–30% safety margin.
✓ PTO Shaft Spline Size: Commonly 1 3/8″ Z6 (6-spline) or 1 3/4″ Z6/Z20. Verify both input and output spline requirements.
✓ PTO Speed: Standard 540 RPM or economy 1000 RPM — confirm your implement’s requirement.
✓ Connection Type: Yoke output for standard shaft tubes, splined shaft for inline assemblies, or flanged output for direct gearbox mounting.
✓ Overload Frequency: Frequent overloads favor auto-reset types (ratchet, friction, automatic). Infrequent but severe overloads suit shear bolt types.
✓ Environmental Conditions: Consider dust, moisture, temperature extremes. Sealed automatic and friction types offer superior protection in harsh environments.
Need help choosing? Kontaktieren Sie unser Ingenieurteam. for personalized selection assistance.
Quality Certification & Service Commitment
✅
ISO 9001:2015
Certified quality management system ensuring consistent product excellence
✅
CE Marked
Compliant with European safety, health, and environmental protection standards
💪
12-Month Warranty
Full warranty against manufacturing defects under normal operating conditions
🚚
Global Shipping
Fast worldwide delivery with professional export packaging and documentation
Frequently Asked Questions (FAQ)
What Our Customers Say
🇳🇿 Craig W. — Dairy farmer, Waikato, New Zealand
“Using these on our pasture toppers and feed wagons. They’ve saved our PTO shafts from damage multiple times when hitting hidden stumps. Brilliant design — the auto-reset means we don’t lose any milking time.”
★★★★★
🇬🇧 William D. — Arable contractor, Yorkshire, United Kingdom
“Top-notch manufacturing quality. These drop straight onto standard UK PTO shafts and the torque ratings are spot-on. I’ve fitted them on cultivators, grain drills, and mowers — all performing perfectly.”
★★★★★
🇦🇺 James M. — Grain farmer, NSW, Australia
“We fitted these torque limiters on all our header drives after losing a gearbox last harvest. They’ve triggered twice on hidden rocks and saved us thousands in repairs each time. Absolutely essential equipment for Australian broadacre farming.”
★★★★★
🇩🇪 Hans K. — Agricultural contractor, Bavaria, Germany
“Excellent build quality — typical of what we expect for professional machinery. The torque ratings are accurate and the fit on our Walterscheid PTO shafts is perfect. We’ve standardized on these across our fleet.”
★★★★★
🇧🇷 Carlos S. — Sugarcane equipment dealer, São Paulo, Brazil
“Reliable performance in extremely tough conditions. Brazilian sugarcane operations are brutal on drivelines, and these limiters consistently protect our customers’ equipment. Great value for the price.”
★★★★★
Related PTO Shaft Products & Accessories
PTO Shaft Components
Complete range of PTO shaft yokes, cross bearings, tubes, shields, and adapters for all standard sizes.
Agricultural Gearboxes
Matched gearboxes designed to work seamlessly with our PTO shafts and torque limiters.
Available PTO Accessories:
• PTO shaft yokes (plain bore, splined, quick-release)
• Safety shields and guard tubes (EN 12965 compliant)
• Spline adapters (1 3/8″ to 1 3/4″ conversion)
• Cross bearing kits and U-joint repair kits
• Telescoping PTO shaft tubes (triangular and lemon profile)
• Push pin kits and retaining hardware
Ready to Protect Your Equipment?
Whether you need a single replacement unit or bulk OEM supply, our team is ready to help you select the perfect torque limiter for your application. We offer competitive B2B pricing, technical consultation, and fast global delivery.
Get a Free Quote →
Browse All Products
OEM & distributor partnerships welcome · MOQ as low as 10 units · Custom specifications available
