We – EPG Group the most significant gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 distinct branches. For much more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
70tons Hydraulic Truck Crane
> The modern jib system adopts embedded block, plug-in increase head and global superior U section jib, which has outstanding lifting functionality and secure and trustworthy lifting perform.
>The special extend and retract approach avoids the bend of the core pipe and cylinder and the split of the growth caused by misoperation, improving the basic safety of the operations.
>Eight patent methods make sure the clean, large performance and energy conservation of the lifting, rotation, and luffing programs.
> Adopt the new hydraulic motor with huge torque starting up point, ma ept the secondary lifting safer.
>The torque limiter adopts colorful Liquid crystal display exhibit, realizing the intelligence of the failure prognosis. The preProductscision is forward of the industry.
>The humanity design can make the cab and management cab a lot more roomy, and straightforward to operate.
>Six distinctive manufacturing technologies make certain the higher quality.
PARAMETERS
Item | QY70K-I parameter | Unit | |
Dimensions | Whole size | 13930 | mm |
Total width | 2800 | mm | |
Total height | 3575 | mm | |
Weight | operation in journey state | 43000(not integrated 1t auxiliary counterweight) | Kg |
Entrance axle load | 17000 | Kg | |
Rear axle load | 26000 | Kg | |
Power | Engine model | Euro III hangfa WD615.338 | |
Engine rated output | 276/2200 | Kw(r/min) | |
Engine rated torque | 1500/1400 | N.m(r/min) | |
Travel | Max.vacation speed | 80 | Km/h |
Max. turning diameter | 24 | mm | |
Max. floor clearance | 327 | mm | |
Technique angle | 19/18 | . | |
Departure angle | 11 | . | |
Max. grade capacity | forty | % | |
Fuel consumption of 100km | 45 | L | |
Lifting performance | Max. total rated lifting load | 50 | t |
Min. rated wor ept radius | 3000 | m | |
Turning radius at swing desk tail | 3.fifty five | mm | |
Max. load second | 2303 | ||
Foundation increase | 11.6 | Kn.m | |
Totally-prolonged principal boom | forty four.5 | m | |
Totally-prolonged principal growth+ luffing jib | 59.5 | m | |
Outrigger longitudinal span | six.1 | m | |
Outrigger lateral span | seven.three | m | |
Wor ept speed | Boom luffing time | 60 | s |
Boom full elevating time | ≤150 | s | |
Max. slewing speed | ≥2. | r/min | |
Primary hoist max. velocity(solitary rope) | ≥130 | m/min | |
Auxiliary hoist max. velocity(single rope ) | ≥180 | m/min |
The use of original products manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our organization and the outlined substitution elements contained herein are not sponsored, accepted, or created by the OEM.