We – EPG Group the greatest gearbox & motors , torque limiter couplings and gears factory in China with 5 various branches. For a lot more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
one. Mixers:
1.1 Computerized Container Mixer
Automated container mixer is wor ept with continuous materials trolleys, the container fills the supplies and lifted up and connnected tightly with mixing head routinely. The mixing head tilts together with the containers, and then receive the homogeneous mixing consequence, following finishing mixing as for each setting time, and return to original situation, the complete method will be controlled by PLC
Main Features:
Several removable containers for round operation
Higher performance
Adopting PLC to recognize automation
Homogenized mixture
No curing granule
Handy for cleaning and servicing
Safe and relaiable procedure
Technical Data:
Product | Quantity (L) | Output (kg/tank) | Mixing Motor (kw) | Tilting Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Handle Method | General Proportions (MM) |
FHJ-fifteen | fifteen | eight | 1.5 | five-10 | PLC | 750*480*950 | ||
FHJ-a hundred and twenty | one hundred twenty | 60 | 5.5 | .two | five-ten | PLC | 1800*1800*1950 | |
FHJ-150 | a hundred and fifty | 70 | five.5 | .37 | 2.2 | five-ten | PLC | 2150*1100*2300 |
FHJ-three hundred | three hundred | one hundred fifty | 15 | three | 2.two | 5-10 | PLC | 2150*1100*2300 |
FHJ-600 | 600 | three hundred | 22 | four | 4 | five-ten | PLC | 2650*1250*2700 |
FHJ-1000 | one thousand | five hundred | thirty | four | four | 5-10 | PLC | 2900*1550*3100 |
FHJ-2000 | 2000 | 1000 | forty five | five.5 | five.5 | five-10 | PLC | 3500*2350*3650 |
one.2 High Velocity Pre-Mixer:
Attributes:
High efficiency & simple operation
Effortless shade modifying, risk-free cleaning
Blended mixing & crushing as a single
Mixing time preseting, brief & homogeneous
Exceptional sealing, powder lea ept free
Vertical or horizontal variety as optional
Technological Knowledge:
Design | Quantity (L) | Mixing Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | General Dimensions (mm) |
GHJ-twenty | 20 | .fifty five | .37 | three-5 | seven-hundred*five hundred*800 |
GHJ-a hundred | 100 | 3 | one.5 | 3-5 | 1000*600*900 |
GHJ-200 | two hundred | five.5 | 3 | 3-five | 1500*900*1400 |
GHJ-300 | three hundred | seven.five | 4 | three-6 | 1800*900*1400 |
GHJ-five hundred | five hundred | fifteen | five.five | four-6 | 1800*1300*1800 |
GHJ-800 | 800 | eighteen.5 | seven.5 | four-six | 1900*1300*2000 |
GHJ-a thousand | one thousand | 22 | seven.5 | four-six | 2300*1400*2000 |
1.3 Double Cone Mixer:
This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This device is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound materials. It has impressive result in mixing powders and particles with comparatively good fluidity. Its barrel is produced of stainless steel, which is polished the two inside and outside, showcasing beautiful appearance and simple procedure.
Technical Information:
Design | Quantity (L) | Output (kg/tank) | Rotating Motor (kw) | Mixing Motor (kw) | Mixing Time (min) | Total Dimensions (mm) |
SXH-one hundred | 300 | one hundred fifty | one.5 | one.five | -thirty | 1760*830*2030 |
SXH-200 | four hundred | 200 | 1.five | one.five | -thirty | 1830*830*2150 |
SXH-300 | 600 | 300 | two.2 | one.5 | -30 | 1980*one thousand*2275 |
SXH-500 | a thousand | 500 | 4 | 4 | 1-30 | 2630*1140*2620 |
SXH-1000 | 2000 | one thousand | five.five | 5.five | -30 | 3060*1440*2860 |
SXH-1500 | 3000 | 1500 | seven.5 | 7.5 | -thirty | 3700*2000*2970 |
SXH-2000 | 4000 | 2000 | 8.5 | 8.five | -30 | 3800*2500*3500 |
two. Twin-Screw Extruder
two.1 High torque & High Pace Rotation Twin-Screw Extruder:
Primary Attributes:
*Full Gearbox from expert EPT maker, lower sounds, sturdy longevity
*High screw pace, large shearing, rapid discharge
*Impartial lube oil cooling program design and style
*Torque limiter to protect the generate train
*Suited for reclaim powder, unique powder generation
*Break up design of barrel and liner inserts for simple cleaning and maintainence
*Prime & Side feeding possibilities
*Other features exact same as conventional sort extruder
Specialized Parameters:
Model | Potential (kg/h) | Screw Diameter (mm) | Screw Length (mm) | Screw Velocity (r/min) | Major Motor (kw) | Feeder Motor (kw) | Heating Electricity (kw) | Total Dimensions (mm) |
TSX-40 | 80-260 | 40 | 16D | -800 | eleven/fifteen/18.5 | .55 | eight | 1850*700*1750 |
TSX-52 | 150-450 | fifty two | 16D | -800 | 22/30/37 | .seventy five | 10 | 2700*900*2200 |
TSX-sixty five | 400-1000 | 65 | 16D | -800 | 45/55/seventy five | 1.one | 12 | 2900*1000*2400 |
TSX-seventy five | 800-1200 | 75 | 16D | -800 | 75/90 | 1.five | sixteen | 3100*1200*2500 |
TSX-85 | 1200-1800 | 85 | 16D | -800 | ninety/one hundred ten | 2.two | twenty | 3700*1500*2900 |
two.2 Standard Type Co-Rotation Parallel Twin Screw Extruder
Characteristics:
*Strong shearing, easy cleansing
*Exact vehicle temperature handle, substantial cooling & heating exchagne
*Hinged clamshell kind barrel opening, segmented liners for simple changing and cost preserving
*Feeder straightforward assembly & disassembly, interior composition to stay away from agglomeration
*Configurable screw utilized for defferent powder formulation
*Screw and barrel adopt unique resources like Cr12MoV, CPM, etc., high donning resisting
*Really gearbox with reduced sound dB amount
*Torque limiter to shield the drive practice
*Lower energy intake
Specialized Parameters:
Product | Potential (kg/h) | Screw Diameter (mm) | Screw Size | Screw Speed (r/min) | Major Motor (kw) | Feeder Motor (kw) | Heating Energy (kw) | Total Proportions (mm) |
SLJ-40 | 80-220 | 40 | 16D | -500 | 11/fifteen/18.5 | .fifty five | 4 | 1800*600*1700 |
SLJ-50 | one hundred fifty-three hundred | 50 | 16D | -500 | 22/30 | .seventy five | eight | 2600*700*2000 |
SLJ-55 | 300-400 | fifty five | 16D | -500 | thirty/37 | .seventy five | eight | 2700*900*2300 |
SLJ-60 | 400-600 | sixty | 16D | -500 | forty five | one.one | twelve | 2750*1000*2350 |
SLJ-75 | 600-800 | 75 | 16D | -five hundred | fifty five | 1.5 | 12 | 2900*1100*2400 |
SLJ-80 | 800-1200 | eighty | 16D | -five hundred | seventy five/90 | two.two | twenty | 3700*800*2800 |
two.3 Lab Type Extruder
Specialized Parameters:
Design | Capacity (kg/h) | Screw Diameter (mm) | Screw Size | Screw Speed (r/min) | Main Motor (kw) | Feeder Motor (kw) | Heating Power (kw) | Total Proportions (mm) |
TSX-twenty | .2-10 | 22 | 16D | -600 | two.2-four | .one | 2 | 1600*300*850 |
SLJ-30 | 1-thirty | thirty | 16D | -five hundred | 3-5.five | .eighteen | three.two | 1430*550*1300 |
SLJ-32 | 40-80 | 32 | 16D | -five hundred | 7.5/eleven | .twenty five | 3.two | 1600*500*1500 |
3 Cooling Belt
three.1 Water Cooled Cooling Belt with Flaker:
Characteristics:
Steady good quality imported steel belt
Bottom cooling water spraying technique, put in heating and cooling unit
Outfitted with information system to keep away from deforming
Far better cooling outcome, greater efficient productivity
Number of routine maintenance and straightforward cleansing
Chips thickness and roller pace adjustable
Crusher with finger pin and teeth variety
Minimized cross contamination, simple procedure
Technical Parameters:
Model | Roller Dia. (mm) | Belt Width (mm) | Belt Length (mm) | Drive Motor (kw) | Ability (kg/h) | Cooling Manner | All round Proportions (mm) |
GDY-406 | 220 | 600 | 4000 | 1.5 | 200-four hundred | Cooled H2o | 4000*750*1600 |
GDY-508 | 325 | 800 | 5000 | three | 400-500 | Cooled Water | 5000*900*1800 |
GDY-510 | 325 | 1000 | 5000 | three | 500-seven-hundred | Cooled Drinking water | 5000*1100*1900 |
GDY-610 | 440 | 1000 | 6000 | 4 | 600-800 | Cooled H2o | 6000*1100*1900 |
GDY-612 | 440 | 1200 | 6000 | 4 | seven-hundred-900 | Cooled Water | 6000*1400*1900 |
GDY-712 | 600 | one thousand | 7000 | five.five | 900-1200 | Cooled Drinking water | 7000*1400*2000 |
3.2 Air Cooled Variety Caterpillar Cooling Belt with Flaker:
Characteristics:
StaWhen a torque overload occurs, the transmitted torque will exceed the set torque level of the Torque Limiter. When this happens, the frictional pressure is no longer powerful ample to transmit the torque from the driving shaft to the driven member, and the pushed member slips amongst the friction disks. When the torque overload is taken out, the Torque Limiter immediately resets and resumes transmitting torque.inless metal made caterpillar, air cooling
Flake chips thichness and conveying pace adjustable
Affordable style for cooling rollers within, specialist floor treatment to stay away from h2o lea ept and rust
Put in with simplified air conditioning unit
Protected procedure, like unexpected emergency button, clockwise and counter-clockwise rotation.
Specialized Parameters:
Model | Roller Dia. (mm) | Belt Width (mm) | Belt Size (mm) | Travel Motor (kw) | Blower Motor (kw) | Capacity (kg/h) | Cooling Method | General Dimensions (mm) |
JFY-204 | one hundred sixty/one hundred sixty | four hundred | 2000 | .55 | 200-four hundred | thirty-one hundred | Chilled Drinking water&Air | 2000*450*900 |
JFY-406 | a hundred and sixty/220 | 600 | 4000 | .75 | 400-500 | one hundred-220 | Chilled Water&Air | 4000*850*950 |
JFY-508 | a hundred and eighty/325 | seven hundred | 5000 | .75 | five hundred-seven hundred | 220-four hundred | Chilled Water&Air | 5000*1050*1200 |
JFY-510 | one hundred eighty/325 | 800 | 5000 | one.one | 600-800 | four hundred-500 | Chilled Drinking water&Air | 5000*1150*1200 |
JFY-610 | one hundred eighty/325 | 800 | 6000 | 1.1 | 700-900 | 500-700 | Chilled H2o&Air | 6000*1150*1200 |
JFY-710 | 180/325 | 1000 | 6000 | one.five | 900-1200 | 600-900 | Chilled Drinking water&Air | 7000*1250*1450 |
JFY-812 | 180/325 | 1000 | 7000 | 2.two | 900-1200 | 900-1200 | Chilled Drinking water&Air | 8000*1650*1600 |
3.3 PU Type Air Cooled Cooling Belt
Characteristics:
Adjustable thichness and roller speed
Air cooled to steer clear of cross contamination
Roller and crusher outfitted with overload security
High efficiencies
One particular piece PU belt to faciliate simple cleaning and upkeep
Compact layout for restricted room
Technological Parameters:
Model | Roll Dia. (mm) | Band Width (mm) | Band Duration (mm) | Motor Electrical power (kw) | Throughput (kg/h) | Dimensions (mm) |
PFY-104 | 156 | four hundred | one thousand | one.one | fifty | a thousand*870*1050 |
PFY-206 | 220 | 600 | 2000 | one.1 | one hundred fifty | 2000*1150*1100 |
PFY-208 | 445 | 800 | 2000 | two.two | three hundred | 2000*1100*1100 |
PFY-210 | 445 | 1000 | 2000 | two.2 | 500 | 2000*1300*1100 |
PFY-310 | 622 | a thousand | 3000 | 2.two | 800 | 2000*1300*1200 |
4 ACM (Air Classifier Mill) Grinding System
Features:
Protection in accordance with EU explosion resistant normal ATEX/PSR11
Low sounds design (from mill to fan system)
Particle dimensions distribution adjustable on request
Mill human body temperature and air intake volume checking
Rotary sieve with distinctive design and style and durable for mesh wear situation
Complete grinding system created for powder dust cost-free
Concluded powder items with more than ninety eight p.c
Higher output, effortless operation cleansing and maintenance
Technological Parameters:
Product | Mill Motor kw | Rotor rpm | Classifier Motor | Classifier rpm | Admirer kw | Air cbm/h | Capacity kg/h | Total dimensions mm |
ACM-02 | 2.2 | 12000 | .37 | -3000 | 3 | 350 | 2-thirty | 1430*550*1300 |
ACM-05 | four | 11000 | .75 | -3000 | four | 800 | 30-80 | 2100*1000*2150 |
ACM-ten | 7.five | 7000 | 1.5 | -3000 | 11 | 2500 | one hundred-260 | 6200*1250*3200 |
ACM-fifteen | eleven | 7000 | one.5 | -3000 | fifteen | 3000 | two hundred-350 | 6500*1300*3300 |
ACM-20 | 15 | 6600 | 2.2 | -3000 | 22 | 3500 | three hundred-400 | 7500*1300*3600 |
ACM-30 | 22 | 5500 | 3 | -3000 | thirty | 4500 | 400-550 | 7900*1500*3600 |
ACM-forty | thirty | 4600 | 5.five | -3000 | 37 | 5500 | 600-800 | 8000*1700*3600 |
ACM-50 | 37 | 4000 | 7.five | -3000 | forty five | 6500 | one thousand-1200 | 9000*1900*3900 |
ACM-sixty | forty five | 3500 | 7.5 | -3000 | 55 | 8000 | 1200-1600 | 9000*2000*4000 |
Firm:
Xihu (West Lake) Dis.sunshine is a top maker in China of Powder Coating Production Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 several years of activities in this ept and have exported to nearly thirty nations and areas in the past 10 many years, and earn widely very good reputations.
We handed CE certification approval and ATEX explosion resistant examination, and so forth. international requirements, we do know how to meet up with the diversified and customized produced requests of our clients.
Our eternal business philosophy: consistant good quality, successful conversation, responsible support.
The use of first gear manufacturer’s (OEM) part figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our firm and the shown replacement areas contained herein are not sponsored, approved, or produced by the OEM.