We – EPG Group the most significant gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 distinct branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
1 reducer:third-course dead axel helical gear transmission composition is adoptedgear and gear axel are produced of warmth taken care of alloy steel scenario ang situation vover with exact assembly and very good seal are made of good quality cast iron .the reducer is unbiased.so its straightforward to load unload it.
2.control box :it has system with up and down stroke protection of break off limiter and can reduce offmain cicuit in an emergency,which guarantees secure operation of electrical block ,electric rlrmrnyd str of prolonged support daily life and operational protection.
3.metal wire rope :it makes use of GB1102-74(6X37+1)hoist metal wire rope which is sturdy in use.
4.conical motor:the hoist motor uses conical rotors of fairly more robust starting torque to brake asynchronous motor and dose not fgrade insulation and its quality of protecion is ip44/ip54
5button swith :it truly is hand-operated,effortless to manage ,and has two modes of cord procedure and cordless distant management.
| CD1/MD1 WIRE ROPE HOIST | |||||||
| Model | CD1/MD1 | ||||||
| Capacity(t) | .five | 1 | 2 | 3 | five | ten | |
| Hoist peak(m) | six 9 12 | six 9 twelve eighteen 24 30 | 6 9 twelve eighteen 24 30 | six 9 12 18 24 thirty | 6 9 12 eighteen 24 30 | 9 12 18 24 thirty | |
| Hoisting Pace(m/min) | 88/.eight | 88/.8 | 88/.eight | 88/.8 | 88/.eight | 77/.seven | |
| Operating Pace(m/min) | twenty(thirty) | 20(30) | twenty(thirty) | twenty(30) | twenty(thirty) | 20(30) | |
| Diameter of wire rope(mm) | four.eight | seven.four | 11 | thirteen | 15 | seventeen | |
| Type of-Beam | 16a-28b | 16a-28b | 20a-32c | 20a-32c | 25a-63c | 25a-63c | |
| Lifting Motor | Energy(kw) | .8 .2/.eight | one.5 .2/.8 | three .4/3 | four.5 .4/4.5 | 7.5 .8/7.5 | thirteen 1.5/thirteen |
| Rotation pace(m/min) | 1380 | 1380 | 1380 | 1380 | 1380 | 1400 | |
| Phases | 3 | three | three | three | 3 | 3 | |
| Voltage(v) | 380 | 380 | 380 | 380 | 380 | 380 | |
| Frequency(Hz) | 50 | fifty | 50 | fifty | 50 | fifty | |
| Electric current(A) | two.4 72/2.4 | four.3 .72/4.three | 7.6 1.25/ 7.six | eleven 2.4/11 | eighteen 2.4/18 | 30 4.3/30 | |
| Running motor | Electricity(kw) | .two | .2 | .four | .four | .eight | .8*two |
| Rotation speed(m/min) | 1380 | 1380 | 1380 | 1380 | 1380 | 1380 | |
| Phases | 3 | 3 | three | three | three | three | |
| Voltage(v) | 380 | 380 | 380 | 380 | 380 | 380 | |
| Electric powered existing(A) | .seventy two | .seventy two | one.twenty five | 1.25 | two.4 | 2.4*two | |
| Frequency(Hz) | 50 | fifty | 50 | fifty | fifty | fifty | |
| Wor ept Stage | M3 | M3 | M3 | M3 | M3 | M3 | |
| N.W (+/- 15%) (kg) | CD1 | 120 a hundred twenty five 145 | a hundred forty five 158 180 195 208 222 | 235 248 296 320 340 365 | 280 three hundred 350 380 405 435 | 445 470 555 590 630 670 | 1571 1063 1166 1263 1317 |
| MD1 | a hundred thirty five 140 a hundred and sixty | one hundred sixty 170 200 210 220 230 | 265 278 326 350 370 395 | 310 330 380 410 435 465 | 480 505 590 630 660 705 | 1100 1153 1256 1353 1407 | |
| CD1(Mounted) | eighty eighty five ninety | 110 one hundred twenty 125 a hundred and forty 150 165 | 168 one hundred eighty 190 In the shaft-to-shaft configuration, the Torq-Tender can accommodate angular shaft misalignment up to 1.5° and parallel misalignments from .005” to .015”. The enclosed design of the mechanical torque limiter allows it to run in a extensive assortment of industrial environments. Unique patterns and materials can be used to face up to even the most adverse conditions.210 230 350 | 220 235 250 275 three hundred 325 | 355 375 390 425 460 five hundred | 759 807 900 987 1032 | |
| MD1(Set) | 100 105 one hundred ten | a hundred thirty one hundred forty 145 a hundred and fifty five one hundred sixty five 180 | 196 210 220 240 260 280 | 250 265 280 305 330 355 | 390 410 425 460 500 535 | 849 897 990 1077 1122 | |
The use of unique products manufacturer’s (OEM) portion quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the listed substitute components contained herein are not sponsored, approved, or made by the OEM.
