{"id":1646,"date":"2023-12-08T00:33:51","date_gmt":"2023-12-08T00:33:51","guid":{"rendered":"https:\/\/limitertorque.com\/china-best-sales-hydropower-economical-wtz-a700-load-moment-limiter-system-for-overhead-crane\/"},"modified":"2023-12-08T00:33:51","modified_gmt":"2023-12-08T00:33:51","slug":"china-best-sales-hydropower-economical-wtz-a700-load-moment-limiter-system-for-overhead-crane","status":"publish","type":"post","link":"https:\/\/limitertorque.com\/ms\/permohonan\/china-best-sales-hydropower-economical-wtz-a700-load-moment-limiter-system-for-overhead-crane\/","title":{"rendered":"China Best Sales Hydropower Economical Wtz-A700 Load Moment Limiter System for Overhead Crane"},"content":{"rendered":"
\n
\n

Penerangan Produk<\/h2>\n

\n

Penerangan Produk<\/strong><\/u>
WTZ A700 Overload limiter<\/strong>\u00a0can be in the form of Chinese characters, graphics, characters and so on comprehensive display the various parameters in the process of work.\u00a0
As the main hook load, vice hook load, work boom Angle, length of boom, radius, etc.;\u00a0<\/p>\n

Overload\u00a0 Limiter<\/strong>\u00a0 Alarm function\u00a0<\/u><\/b><\/p>\n

Have sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system.\u00a0
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.<\/p>\n

Overload Limiter<\/strong>\u00a0protection function\u00a0<\/u><\/b>
Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security.\u00a0<\/p>\n

WTZ\u00a0 A700\u00a0Load Moment Indicator<\/strong>(safe load indicator or Crane computer) is a device which\u00a0is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the safe operating range. In some cases, the device will physically lock out the machinery in circumstances it determines to be unsafe.\u00a0<\/p>\n

It controls the lifting equipment to function as per the manufacturer’s suggested safe load charts. Each of the measured parameters like load weight, working radius, control limit,angle and extension of the crane boom, etc will then further be displayed in the operator’s cabin.<\/p>\n

\u00a0<\/p>\n

WTZ\u00a0A700\u00a0overload limiter system<\/strong>\u00a0for\u00a0terminal\u00a0quayside crane\u00a0<\/u><\/b><\/p>\n

\n

\n

WTZ-A700 Safe\u00a0 Load Indicator system(\u00a0LMI )<\/strong><\/u>\u00a0
1.WTZ A700 display\/monitor (8inch color touch LCD screen ,must)
2.Data control\u00a0 box(must)
3.Pin\u00a0 type\u00a0 Lod cell(must)
4.Wind speed\u00a0 senosr(optional)
5.Encorder(optional)
6.Other\u00a0 spare\u00a0 parts…<\/p>\n

\n

\u00a0<\/p>\n

Technical Parameters<\/p>\n

\u00a0<\/p>\n\n\n\n\n\n\n\n\n\n
Model: WTL-A700<\/td>\nControl Output: <= 5 Channels<\/td>\n<\/tr>\n
Display:8 inch LCD<\/td>\nSystem Composition Error: \u00b15%(F.S.)<\/td>\n<\/tr>\n
Working Temperature: -20\u00baC~60\u00baC<\/td>\nPower Comsumption:<35W<\/td>\n<\/tr>\n
Operating Humidity: 95%RH(25\u00baC)<\/td>\nAlarm Volume: >60db<\/td>\n<\/tr>\n
Weight Measurement Range: 0T~999.9T<\/td>\nIP Grade: IP 64<\/td>\n<\/tr>\n
Resolving Ability: 0.1T<\/td>\nPower Supply: AC220V\u00b110%<\/td>\n<\/tr>\n
Singal Input: <= 6 Channels<\/td>\nApplication:terminal container\u00a0 crane&portal\u00a0 crane<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/p>\n

Installation Cases<\/p>\n

\u00a0<\/p>\n

\u00a0<\/p>\n

Certifications<\/p>\n

\u00a0<\/p>\n

\u00a0<\/p>\n

Company Profile<\/p>\n

Weite Technologies Co.,Ltd<\/strong><\/u><\/p>\n

Founded in 2002, it is national hi-tech enterprise located in HangZhou, China. It has been focusing on R&D and\u00a0OEM manufacturing of lifting safety protection devices such as\u00a0Load Moment Indicator, Safe monitoring\u00a0systems, overload limiter,\u00a0Load cell,\u00a0Anemometers etc.We\u00a0continuously concentrate on ensuring lifting equipments run safely as long-term pursuing goal.\u00a0<\/p>\n

“The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps”\u00a0. Nowadays,\u00a0WTAU products are widely used in marine industry,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been wide spreaded to over 70 countries and regions.<\/p>\n

Global\u00a0Partners
<\/u><\/b>
\u00a0<\/p>\n

FAQ<\/p>\n

1) Is your company well-reputated? How to prove that?<\/strong><\/p>\n

It is a China Top 3 brand focusing on Crane Safety Protection Equipment. We are also Safety Partners for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(top 45), Big Crane(top 94) and Top 500 companies such as ABB, Macgragor,TTS,CNOOC,etc. Products are been sold to over 70 countries and regions globally.\u00a0
\u00a0<\/p>\n

2) How to assure the quality?<\/strong><\/p>\n

The Product Warranty for the total item is 12 months. Any problem after installation, we will change the new 1 for free.<\/p>\n

\u00a0<\/p>\n

3) How to install the LMI?<\/strong><\/p>\n

English User Manual(include all the details of each item) will be offered for installation and trouble shooting(refer to the pic below). Also free Remote Instant Technical assistance would be offered by our english engineers. Or we can send our engineers to assist you locally.<\/p>\n

\u00a0<\/p>\n

4) How much is your LMI system?<\/strong><\/p>\n

Send me the crane model, hook number, working conditions(Luffing Tower Working Condition, Pilling) and special requirement and the like. Your contact info is a must.<\/p>\n

\u00a0<\/p>\n

5) How can I place order?\u00a0<\/strong>
A: You can contact us by email about your order details, or place order on line.<\/p>\n

\u00a0<\/p>\n

6) How can I pay you?<\/strong><\/p>\n

A: After you confirm our PI, we will request you to pay. T\/T and Paypal, Western Union are the most usual ways we are using.\u00a0<\/p>\n

\u00a0<\/p>\n

Related Products<\/p>\n

\u00a0<\/p>\n

\u00a0<\/p>\n

\n

\n

\n<\/div>\n
\n\n\n\n\n
Task:<\/th>\nAdjust<\/td>\n<\/tr>\n
Structure:<\/th>\nCombination<\/td>\n<\/tr>\n
Mathematical Model:<\/th>\nLinear<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/div>\n\n\n\n
Penyesuaian:<\/th>\n\n
\n
\n Tersedia\n <\/div>\n

|<\/span><\/p>\n

<\/i><\/p><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

.kos-penghantaran-tm .status-tm-mati{latar belakang: tiada;padan:0;warna: #1470cc}<\/p>\n

<\/div>\n\n\n\n
\n Kos Penghantaran:<\/p>\n
\n <\/i><\/p>\n
\n
\n

Anggaran pengangkutan setiap unit.<\/p>\n


\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>
\n\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n <\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/th>\n

\n
\n
\n <\/b>
\n <\/span>
\n tentang kos penghantaran dan anggaran masa penghantaran.\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n
Kaedah Pembayaran:\n <\/th>\n\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>\n <\/td>\n<\/tr>\n

 \n <\/th>\n\n
\n <\/i>
\n Bayaran Awal
\n <\/span>
\n
\n <\/i>
\n Bayaran Penuh
\n <\/span>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
Mata wang:\n <\/th>\n\n US$<\/span>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
Pulangan & bayaran balik:\n <\/th>\n\n Anda boleh memohon bayaran balik sehingga 30 hari selepas penerimaan produk.\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n<\/table>\n

<\/p>\n

What is the impact of material selection on the performance and durability of injection molded parts?<\/h3>\n

The material selection for injection molded parts has a significant impact on their performance and durability. The choice of material influences various key factors, including mechanical properties, chemical resistance, thermal stability, dimensional stability, and overall part functionality. Here’s a detailed explanation of the impact of material selection on the performance and durability of injection molded parts:<\/p>\n

Mechanical Properties:<\/strong><\/p>\n

The mechanical properties of the material directly affect the part’s strength, stiffness, impact resistance, and fatigue life. Different materials exhibit varying levels of tensile strength, flexural strength, modulus of elasticity, and elongation at break. The selection of a material with appropriate mechanical properties ensures that the injection molded part can withstand the applied forces, vibrations, and operational stresses without failure or deformation.<\/p>\n

Chemical Resistance:<\/strong><\/p>\n

The material’s resistance to chemicals and solvents is crucial in applications where the part comes into contact with aggressive substances. Certain materials, such as engineering thermoplastics like ABS (Acrylonitrile Butadiene Styrene) or PEEK (Polyether Ether Ketone), exhibit excellent chemical resistance. Choosing a material with the appropriate chemical resistance ensures that the injection molded part maintains its integrity and functionality when exposed to specific chemicals or environments.<\/p>\n

Thermal Stability:<\/strong><\/p>\n

The thermal stability of the material is essential in applications that involve exposure to high temperatures or thermal cycling. Different materials have varying melting points, glass transition temperatures, and heat deflection temperatures. Selecting a material with suitable thermal stability ensures that the injection molded part can withstand the anticipated temperature variations without dimensional changes, warping, or degradation of mechanical properties.<\/p>\n

Dimensional Stability:<\/strong><\/p>\n

The dimensional stability of the material is critical in applications where precise tolerances and dimensional accuracy are required. Some materials, such as engineering thermoplastics or filled polymers, exhibit lower coefficients of thermal expansion, minimizing the part’s dimensional changes with temperature variations. Choosing a material with good dimensional stability helps ensure that the injection molded part maintains its shape, size, and critical dimensions over a wide range of operating temperatures.<\/p>\n

Part Functionality:<\/strong><\/p>\n

The material selection directly impacts the functionality and performance of the injection molded part. Different materials offer unique properties that can be tailored to meet specific application requirements. For example, materials like polycarbonate (PC) or polypropylene (PP) offer excellent transparency, making them suitable for applications requiring optical clarity, while materials like polyamide (PA) or polyoxymethylene (POM) provide low friction and wear resistance, making them suitable for moving or sliding parts.<\/p>\n

Cycle Time and Processability:<\/strong><\/p>\n

The material selection can also affect the cycle time and processability of injection molding. Different materials have different melt viscosities and flow characteristics, which influence the filling and cooling times during the molding process. Materials with good flow properties can fill complex mold geometries more easily, reducing the cycle time and improving productivity. It’s important to select a material that can be effectively processed using the available injection molding equipment and techniques.<\/p>\n

Cost Considerations:<\/strong><\/p>\n

The material selection also impacts the overall cost of the injection molded part. Different materials have varying costs, and selecting the most suitable material involves considering factors such as material availability, tooling requirements, processing conditions, and the desired performance characteristics. Balancing the performance requirements with cost considerations is crucial in achieving an optimal material selection that meets the performance and durability requirements within the budget constraints.<\/p>\n

Overall, material selection plays a critical role in determining the performance, durability, and functionality of injection molded parts. Careful consideration of mechanical properties, chemical resistance, thermal stability, dimensional stability, part functionality, cycle time, processability, and cost factors helps ensure that the chosen material meets the specific application requirements and delivers the desired performance and durability over the part’s intended service life.<\/p>\n

<\/p>\n

Can you provide guidance on the selection of injection molded materials based on application requirements?<\/h3>\n

Yes, I can provide guidance on the selection of injection molded materials based on application requirements. The choice of material for injection molding plays a critical role in determining the performance, durability, and functionality of the molded parts. Here’s a detailed explanation of the factors to consider and the guidance for selecting the appropriate material:<\/p>\n

1. Mechanical Properties:<\/strong><\/p>\n

Consider the mechanical properties required for the application, such as strength, stiffness, impact resistance, and wear resistance. Different materials have varying mechanical characteristics, and selecting a material with suitable properties is crucial. For example, engineering thermoplastics like ABS, PC, or nylon offer high strength and impact resistance, while materials like PEEK or ULTEM provide exceptional mechanical performance at elevated temperatures.<\/p>\n

2. Chemical Resistance:<\/strong><\/p>\n

If the part will be exposed to chemicals, consider the chemical resistance of the material. Some materials, like PVC or PTFE, exhibit excellent resistance to a wide range of chemicals, while others may be susceptible to degradation or swelling. Ensure that the selected material can withstand the specific chemicals it will encounter in the application environment.<\/p>\n

3. Thermal Properties:<\/strong><\/p>\n

Evaluate the operating temperature range of the application and choose a material with suitable thermal properties. Materials like PPS, PEEK, or LCP offer excellent heat resistance, while others may have limited temperature capabilities. Consider factors such as the maximum temperature, thermal stability, coefficient of thermal expansion, and heat transfer requirements of the part.<\/p>\n

4. Electrical Properties:<\/strong><\/p>\n

For electrical or electronic applications, consider the electrical properties of the material. Materials like PBT or PPS offer good electrical insulation properties, while others may have conductive or dissipative characteristics. Determine the required dielectric strength, electrical conductivity, surface resistivity, and other relevant electrical properties for the application.<\/p>\n

5. Environmental Conditions:<\/strong><\/p>\n

Assess the environmental conditions the part will be exposed to, such as humidity, UV exposure, outdoor weathering, or extreme temperatures. Some materials, like ASA or HDPE, have excellent weatherability and UV resistance, while others may degrade or become brittle under harsh conditions. Choose a material that can withstand the specific environmental factors to ensure long-term performance and durability.<\/p>\n

6. Regulatory Compliance:<\/strong><\/p>\n

Consider any regulatory requirements or industry standards that the material must meet. Certain applications, such as those in the medical or food industries, may require materials that are FDA-approved or comply with specific certifications. Ensure that the selected material meets the necessary regulatory and safety standards for the intended application.<\/p>\n

7. Cost Considerations:<\/strong><\/p>\n

Evaluate the cost implications associated with the material selection. Different materials have varying costs, and the material choice should align with the project budget. Consider not only the material cost per unit but also factors like tooling expenses, production efficiency, and the overall lifecycle cost of the part.<\/p>\n

8. Material Availability and Processing:<\/strong><\/p>\n

Check the availability of the material and consider its processability in injection molding. Ensure that the material is readily available from suppliers and suitable for the specific injection molding process parameters, such as melt flow rate, moldability, and compatibility with the chosen molding equipment.<\/p>\n

9. Material Testing and Validation:<\/strong><\/p>\n

Perform material testing and validation to ensure that the selected material meets the required specifications and performance criteria. Conduct mechanical, thermal, chemical, and electrical tests to verify the material’s properties and behavior under application-specific conditions.<\/p>\n

Consider consulting with material suppliers, engineers, or experts in injection molding to get further guidance and recommendations based on the specific application requirements. They can provide valuable insights into material selection based on their expertise and knowledge of industry standards and best practices.<\/p>\n

By carefully considering these factors and guidance, you can select the most appropriate material for injection molding that meets the specific application requirements, ensuring optimal performance, durability, and functionality of the molded parts.<\/p>\n

<\/p>\n

Bolehkah anda huraikan pelbagai bahan yang boleh digunakan untuk pengacuan suntikan?<\/h3>\n

Pengacuan suntikan menawarkan pelbagai jenis bahan yang boleh digunakan untuk menghasilkan bahagian dengan pelbagai sifat dan ciri. Pemilihan bahan bergantung pada keperluan khusus aplikasi, termasuk sifat mekanikal, rintangan kimia, kestabilan terma, ketelusan dan kos. Berikut ialah penerangan tentang pelbagai bahan yang biasa digunakan untuk pengacuan suntikan:<\/p>\n

1. Termoplastik:<\/strong><\/p>\n

Termoplastik merupakan bahan yang paling biasa digunakan dalam pengacuan suntikan kerana fleksibiliti, kemudahan pemprosesan dan kebolehkitar semulanya. Antara termoplastik yang biasa digunakan termasuk:<\/p>\n

    \n
  • Polipropilena (PP):<\/strong> PP ialah termoplastik yang ringan dan fleksibel dengan rintangan kimia yang sangat baik dan kos rendah. Ia digunakan secara meluas dalam alat ganti automotif, pembungkusan, produk pengguna dan peranti perubatan.<\/li>\n
  • Polietilena (PE):<\/strong> PE ialah termoplastik serba boleh dengan kekuatan hentaman dan rintangan kimia yang sangat baik. Ia digunakan dalam pelbagai aplikasi, termasuk pembungkusan, paip, komponen automotif dan mainan.<\/li>\n
  • Polistirena (PS):<\/strong> PS ialah termoplastik tegar dan lutsinar dengan kestabilan dimensi yang baik. Ia biasanya digunakan dalam pembungkusan, barangan pengguna dan produk pakai buang.<\/li>\n
  • Polikarbonat (PC):<\/strong> PC ialah termoplastik lutsinar dan tahan hentaman dengan rintangan haba yang tinggi. Ia menemui aplikasi dalam bahagian automotif, komponen elektronik dan kanta optik.<\/li>\n
  • Akrilonitril Butadiena Stirena (ABS):<\/strong> ABS ialah termoplastik serba boleh dengan keseimbangan kekuatan, rintangan hentaman dan rintangan haba yang baik. Ia biasanya digunakan dalam alat ganti automotif, penutup elektronik dan produk pengguna.<\/li>\n
  • Polivinil Klorida (PVC):<\/strong> PVC ialah termoplastik yang tahan lama dan tahan api dengan rintangan kimia yang baik. Ia digunakan dalam pelbagai aplikasi, termasuk pembinaan, penebat elektrik dan tiub perubatan.<\/li>\n
  • Polietilena Tereftalat (PET):<\/strong> PET ialah termoplastik yang kuat dan ringan dengan sifat kejelasan dan penghalang yang sangat baik. Ia biasanya digunakan dalam pembungkusan, botol minuman dan gentian tekstil.<\/li>\n<\/ul>\n

    2. Kejuruteraan Plastik:<\/strong><\/p>\n

    Plastik kejuruteraan menawarkan sifat mekanikal, rintangan haba dan kestabilan dimensi yang dipertingkatkan berbanding termoplastik komoditi. Antara plastik kejuruteraan yang biasa digunakan dalam pengacuan suntikan termasuk:<\/p>\n

      \n
    • Poliamida (PA\/Nilon):<\/strong> Nilon ialah plastik kejuruteraan yang kuat dan tahan lama dengan rintangan haus yang sangat baik dan sifat geseran yang rendah. Ia digunakan dalam komponen automotif, penyambung elektrik dan aplikasi perindustrian.<\/li>\n
    • Polikarbonat (PC):<\/strong> PC, yang disebut sebelum ini, juga dianggap sebagai plastik kejuruteraan kerana rintangan hentaman yang luar biasa dan prestasi suhu tinggi.<\/li>\n
    • Polioksimetilena (POM\/Asetal):<\/strong> POM ialah plastik kejuruteraan berkekuatan tinggi dengan geseran rendah dan kestabilan dimensi yang sangat baik. Ia menemui aplikasi dalam gear, galas dan komponen mekanikal jitu.<\/li>\n
    • Polifenilena Sulfida (PPS):<\/strong> PPS ialah plastik kejuruteraan berprestasi tinggi dengan rintangan kimia dan kestabilan terma yang sangat baik. Ia digunakan dalam komponen elektrik dan elektronik, bahagian automotif dan aplikasi perindustrian.<\/li>\n
    • Polieterketon (PEEK):<\/strong> PEEK ialah plastik kejuruteraan berprestasi tinggi dengan rintangan haba, rintangan kimia dan sifat mekanikal yang luar biasa. Ia biasanya digunakan dalam aplikasi aeroangkasa, perubatan dan perindustrian.<\/li>\n<\/ul>\n

      3. Plastik Termoset:<\/strong><\/p>\n

      Plastik termoset menjalani proses pengikatan silang kimia semasa pengacuan, menghasilkan bahan yang tegar dan tahan haba. Antara plastik termoset yang biasa digunakan dalam pengacuan suntikan termasuk:<\/p>\n

        \n
      • Epoksi:<\/strong> Resin epoksi menawarkan rintangan kimia dan sifat mekanikal yang sangat baik. Ia biasanya digunakan dalam komponen elektrik, pelekat dan salutan.<\/li>\n
      • Fenolik:<\/strong> Resin fenolik dikenali kerana rintangan haba dan sifat penebat elektriknya yang sangat baik. Ia menemui aplikasi dalam suis elektrik, alat ganti automotif dan barangan pengguna.<\/li>\n
      • Urea-formaldehid (UF) dan Melamina-formaldehid (MF):<\/strong> Resin UF dan MF digunakan untuk membentuk komponen elektrik, peralatan dapur dan lamina hiasan.<\/li>\n<\/ul>\n

        4. Elastomer:<\/strong><\/p>\n

        Elastomer, juga dikenali sebagai bahan seperti getah, digunakan untuk menghasilkan bahagian yang fleksibel dan elastik. Ia memberikan daya tahan, ketahanan dan sifat pengedap yang sangat baik. Antara elastomer yang biasa digunakan dalam pengacuan suntikan termasuk:<\/p>\n

          \n
        • Elastomer Termoplastik (TPE):<\/strong> TPE ialah kelas bahan yang menggabungkan ciri-ciri getah dan plastik. Ia menawarkan fleksibiliti, set mampatan yang baik dan kemudahan pemprosesan. TPE menemui aplikasi dalam komponen automotif, produk pengguna dan peranti perubatan.<\/li>\n
        • Silikon:<\/strong> Elastomer silikon memberikan rintangan haba, penebat elektrik dan biokeserasian yang sangat baik. Ia biasanya digunakan dalam peranti perubatan, pengedap automotif dan produk isi rumah.<\/li>\n
        • Getah Stirena Butadiena (SBR):<\/strong> SBR ialah elastomer sintetik dengan rintangan lelasan yang baik dan fleksibiliti suhu rendah. Ia digunakan dalam tayar, gasket dan tali sawat.<\/li>\n
        • Monomer Etilena Propilena Diena (EPDM):<\/strong> EPDM ialah elastomer tahan lama dengan rintangan cuaca dan rintangan kimia yang sangat baik. Ia menemui aplikasi dalam pengedap automotif, jalur cuaca dan membran bumbung.<\/li>\n<\/ul>\n

          5. Komposit:<\/strong><\/p>\n

          Acuan suntikan juga boleh digunakan untuk menghasilkan bahagian yang diperbuat daripada bahan komposit, yang menggabungkan dua atau lebih jenis bahan yang berbeza untuk mencapai sifat tertentu. Bahan komposit yang biasa digunakan dalam pengacuan suntikan termasuk:<\/p>\n

            \n
          • Plastik Bertetulang Gentian Kaca (GFRP):<\/strong> GFRP menggabungkan gentian kaca dengan termoplastik atau resin termoset untuk meningkatkan kekuatan mekanikal, kekakuan dan kestabilan dimensi. Ia digunakan dalam komponen automotif, penutup elektrik dan barangan sukan.<\/li>\n
          • Plastik Bertetulang Serat Karbon (CFRP):<\/strong> CFRP menggabungkan gentian karbon dengan resin termoset untuk menghasilkan bahagian dengan kekuatan, kekakuan dan sifat ringan yang luar biasa. Ia biasanya digunakan dalam aeroangkasa, automotif dan peralatan sukan berprestasi tinggi.<\/li>\n
          • Plastik Berisi Logam:<\/strong> Plastik berisi logam menggabungkan zarah atau gentian logam ke dalam termoplastik untuk mencapai sifat seperti kekonduksian, perisai elektromagnet atau peningkatan berat dan rasa. Ia digunakan dalam penyambung elektrik, komponen automotif dan elektronik pengguna.<\/li>\n<\/ul>\n

            Ini hanyalah beberapa contoh bahan yang digunakan dalam pengacuan suntikan. Terdapat banyak bahan khusus lain yang tersedia, setiap satunya dengan sifat uniknya sendiri, seperti kalis api, geseran rendah, rintangan kimia atau pensijilan khusus untuk aplikasi perubatan atau sentuhan makanan. Pemilihan bahan bergantung pada prestasi yang diingini, pertimbangan kos dan keperluan kawal selia aplikasi khusus.<\/p>\n

            \"China\"China
            editor by CX 2023-12-08<\/p>","protected":false},"excerpt":{"rendered":"

            Product Description Product DescriptionWTZ A700 Overload limiter\u00a0can be in the form of Chinese characters, graphics, characters and so on comprehensive display the various parameters in the process of work.\u00a0As the main hook load, vice hook load, work boom Angle, length of boom, radius, etc.;\u00a0 Overload\u00a0 Limiter\u00a0 Alarm function\u00a0 Have sound and light alarm function: when […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-1646","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/posts\/1646","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/comments?post=1646"}],"version-history":[{"count":0,"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/posts\/1646\/revisions"}],"wp:attachment":[{"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/media?parent=1646"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/categories?post=1646"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/limitertorque.com\/ms\/wp-json\/wp\/v2\/tags?post=1646"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}