{"id":1535,"date":"2023-05-06T04:09:26","date_gmt":"2023-05-06T04:09:26","guid":{"rendered":"http:\/\/limitertorque.com\/china-best-sales-overhead-crane-eot-hoist-use-crane-overload-limiter-system-limiter-torque-function\/"},"modified":"2023-05-06T04:09:26","modified_gmt":"2023-05-06T04:09:26","slug":"china-best-sales-overhead-crane-eot-hoist-use-crane-overload-limiter-system-limiter-torque-function","status":"publish","type":"post","link":"https:\/\/limitertorque.com\/id\/application\/china-best-sales-overhead-crane-eot-hoist-use-crane-overload-limiter-system-limiter-torque-function\/","title":{"rendered":"China Best Sales Overhead Crane Eot Hoist Use Crane Overload Limiter System limiter torque function"},"content":{"rendered":"
\n
\n

Deskripsi Produk<\/h2>\n

\n

<\/h2>\n

Deskripsi Produk<\/strong><\/u>
WTZ A100N Overload limiter<\/strong>\u00a0Dapat berupa aksara Cina, grafik, karakter, dan sebagainya, yang secara komprehensif menampilkan berbagai parameter dalam proses kerja.\u00a0
Seperti beban kait utama, beban kait tambahan, sudut lengan kerja, panjang lengan, radius, dll.;\u00a0<\/p>\n

\u25cbOverload\u00a0 Limiter<\/strong><\/u>\u00a0 Fungsi alarm\u00a0
Dilengkapi fungsi alarm suara dan cahaya: ketika batas amplitudo kerja lengan derek mendekati batas kerja, ketika beban angkat dan perangkat torsi mendekati batas beban yang diizinkan, sistem torsi mengeluarkan peringatan berupa bunyi bip pelan. Lampu peringatan sistem torsi berkedip perlahan.\u00a0
Ketika jangkauan kerja rangka jib mencapai batas kerja, ketika beban angkat dan torsi mencapai momen batas beban yang diizinkan, peralatan akan mengirimkan bunyi alarm darurat. Alarm kekurangan torsi akan ditandai dengan lampu merah yang berkedip.<\/p>\n

\u25cb Pembatas Beban Berlebih<\/strong><\/u> fungsi perlindungan\u00a0
Fungsi kontrol keluaran: ketika batas amplitudo lengan derek mendekati batas kerja, saat mengangkat beban dan torsi perangkat mendekati batas beban yang diizinkan, sistem mengeluarkan sinyal kontrol torsi untuk menghentikan derek agar tidak terus bergerak ke arah yang berisiko, dan memungkinkan derek bergerak ke arah yang aman.\u00a0<\/p>\n

    <\/ul>\n

    Load Moment Indicator(safe load indicator or Crane computer) is a device which\u00a0is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the safe operating range. In some cases, the device will physically lock out the machinery in circumstances it determines to be unsafe.\u00a0<\/p>\n

    Sistem ini mengontrol peralatan pengangkat agar berfungsi sesuai dengan tabel beban aman yang disarankan oleh pabrikan. Setiap parameter yang diukur seperti berat beban, radius kerja, batas kontrol, sudut dan perpanjangan lengan derek, dll., kemudian akan ditampilkan di kabin operator.<\/p>\n

    \u00a0WTZ-A100N Overload\u00a0 Limiter (\u00a0LMI )<\/strong><\/u>\u00a0System<\/p>\n

    Parameter Teknis<\/u><\/strong><\/p>\n

    \u00a0<\/p>\n

    DATA LOGGER<\/strong><\/u><\/p>\n

    Data USB downloadable: built-in USB interface, can support operating data download, can review the historical data from any time period. Through the analysis of the record, the complete status of site operation can be restored.\u00a0Ultra-large Capacity: the device can support actual load data 50,000 circular logging, higher capacity than the standard 16000 record.<\/p>\n

    Data Record Image<\/strong><\/u><\/p>\n

    Kasus Instalasi<\/u><\/strong><\/p>\n

    \u00a0<\/p>\n

    Sertifikasi<\/strong><\/u><\/p>\n

    Company Information<\/strong><\/u><\/p>\n<\/p>\n

    Weite Technologies Co., Ltd.<\/strong><\/u><\/p>\n

    Didirikan pada tahun 2002, perusahaan ini merupakan perusahaan teknologi tinggi nasional yang berlokasi di Hangzhou, Tiongkok. Perusahaan ini berfokus pada penelitian dan pengembangan serta manufaktur OEM perangkat perlindungan keselamatan pengangkatan seperti Indikator Momen Beban, sistem pemantauan keselamatan, pembatas beban berlebih, sel beban, anemometer, dll. Kami terus berkonsentrasi untuk memastikan peralatan pengangkatan beroperasi dengan aman sebagai tujuan jangka panjang.\u00a0<\/p>\n

    “The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps”\u00a0. Nowadays,\u00a0WTAU products are widely used in marine industry,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been wide spreaded to over 30 countries and regions.<\/p>\n

    Global Partners
    <\/u><\/strong><\/p>\n

    \u00a0<\/p>\n

    Pertanyaan yang Sering Diajukan (FAQ)<\/strong><\/u><\/p>\n

    1) Apakah perusahaan Anda memiliki reputasi yang baik? Bagaimana cara membuktikannya?<\/strong><\/p>\n

    It is a China Top 3 brand focusing on Crane Safety Protection Equipment. We are also Safety Partners for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(top 45), Big Crane(top 94) and Top 500 companies such as ABB, Macgragor,TTS,CNOOC,etc. Products are been sold to over 30 countries and regions globally.\u00a0
    \u00a0<\/p>\n

    2) Bagaimana cara memastikan kualitasnya?<\/strong><\/p>\n

    Garansi produk untuk keseluruhan barang adalah 12 bulan. Jika ada masalah setelah pemasangan, kami akan menggantinya dengan yang baru secara gratis.<\/p>\n

    \u00a0<\/p>\n

    3) Bagaimana cara memasang LMI?<\/strong><\/p>\n

    Panduan Pengguna berbahasa Inggris (termasuk semua detail setiap item) akan diberikan untuk instalasi dan pemecahan masalah (lihat gambar di bawah). Selain itu, bantuan teknis instan jarak jauh gratis akan ditawarkan oleh teknisi berbahasa Inggris kami. Atau kami dapat mengirim teknisi kami untuk membantu Anda secara lokal.<\/p>\n

    \u00a0<\/p>\n

    4) Berapa harga sistem LMI Anda?<\/strong><\/p>\n

    Kirimkan kepada saya model derek, nomor kait, kondisi kerja (Kondisi Kerja Menara Luffing, Pemancangan Tiang) dan persyaratan khusus serta hal-hal lain yang terkait. Informasi kontak Anda wajib disertakan.<\/p>\n

    \u00a0<\/p>\n

    5) Bagaimana cara saya memesan?\u00a0<\/strong>
    A: Anda dapat menghubungi kami melalui email mengenai detail pesanan Anda, atau melakukan pemesanan secara online.<\/p>\n

    \u00a0<\/p>\n

    6) Bagaimana cara saya membayar Anda?<\/strong><\/p>\n

    A: Setelah Anda mengkonfirmasi PI kami, kami akan meminta Anda untuk melakukan pembayaran. T\/T, Paypal, dan Western Union adalah cara pembayaran yang paling umum kami gunakan.\u00a0<\/p>\n

    Produk Terkait<\/strong><\/u><\/p>\n

    \u00a0<\/p>\n

    \n

    \n

    \n<\/div>\n
    \n\n\n\n\n\n\n\n
    After-sales Service:<\/th>\nSpare Parts<\/td>\n<\/tr>\n
    Warranty:<\/th>\n1 Year<\/td>\n<\/tr>\n
    Type:<\/th>\nGantry Crane & Portal Crane<\/td>\n<\/tr>\n
    Aplikasi:<\/th>\nHoisting Machinery<\/td>\n<\/tr>\n
    Certification:<\/th>\nCE, ISO9001: 2000, ISO: 9001, CE<\/td>\n<\/tr>\n
    Condition:<\/th>\nNew<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
    <\/div>\n\n\n\n
    Customization:<\/th>\n\n
    \n
    \n Available\n <\/div>\n

    |<\/span><\/p>\n

    <\/i>Customized Request<\/p><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n<\/table>\n

    \"limiter<\/p>\n

    Choosing the Right Limiter Torque Control System<\/h2>\n

    Whether you’re building a new machine or retrofitting an existing one, you’ll need a limiter torque control system. There are a number of different types available, and they can help you ensure the right torque is applied to your machine’s parts.<\/p>\n

    Pneumatic approach to limiter torque<\/h2>\n

    Choosing the right torque limiter is essential to protect your machine and drive system from over-torque. There are several types of torque limiters, including mechanical, pneumatic, electromagnetic, and magnetic.
    Mechanical torque limiters are a common type of torque limiter. They engage the driven side of the drive shaft by using a series of rollers or balls. They can be used in a wide variety of applications.
    A pneumatic approach to limiter torque is used in applications that require maximum power during start-up. A torque limiter consists of an input shaft and an output shaft, which are connected by a pin. Once the torque limiter exceeds the torque limit, the pin fractures and the output shaft is disengaged. The pin can then be replaced to reconnect the shaft.
    Torque limiters can also be used to control air volume. In pneumatic systems, air pressure is applied to a piston to force a ball detent device to engage. A microswitch in the case activates the limit switch when excessive loads are applied.
    Electromagnetic torque limiters are similar to the pneumatic approach. The output shaft is a rotor. The inner shaft is a shaft with a small back iron that carries a PM field. The PM field generates torque, which is controlled by the angle between the magnets.
    Electromagnetic torque limiters can be designed to operate at any temperature. They can also have a variable airgap to change the magnetic field. The MR fluid can also be used in magnetic field-based torque limiters to increase the density of torque.
    Mechanical torque limiters are also used to limit transmission torque in robotic applications. They are available in a variety of sizes. They can also be integrated with an electric machine for mass savings.
    Torque limiters can also be used as fail-safe devices. They act like fuses during overload. When the torque limiter is disengaged, the torque is transmitted to the drive system. This prevents damage to the drive system components.
    Depending on your application, you can choose a torque limiter that can be adjusted to a low value. This allows you to easily control the torque limit for the start-up torque and can be adjusted to accommodate the machine’s cycle requirements.\"limiter<\/p>\n

    Permanent-magnet synchronous torque limiter<\/h2>\n

    Whether you are looking to replace a damaged motor, or simply want to enhance performance in an application with high speed passing requirements, the application of a permanent-magnet synchronous torque limiter can be a great option. This type of torque limiter can help improve high speed passing performance, as well as provide a safety measure that prevents the engine from overheating.
    Torque limiters come in a variety of formats. They can be static or dynamic, and can be reset manually or automatically. They can also be in the form of a hub, a sheave, or a pulley. Some can even mount a sprocket. The synchronous magnetic type uses two discs, with mating magnets on the face of each disc. The torque limiter can be adjusted by changing the gap between the magnets.
    The synchronous magnetic type can also be used to transmit torque through a thin plastic wall. This type of limiter can also be set to a maximum value. It is also useful in applications with continuous running. It can be used in low power applications, such as robotic actuators.
    A magnetic particle clutch is also a good example of a torque limiter. This type uses a current to create a magnetic field, a la the magnetic hysteresis. This magnetic field is then converted into d-q coordinates, which are viewed in the rotor reference frame. The magnetic particle clutch’s most notable feature is that the torque can be statically set or dynamically adjusted.
    The most important function of a torque limiter is to prevent the engine from overheating or explosion. This can be achieved by setting the correct torque limit, or by having a system that will automatically reset the limit if the torque limit is exceeded. Some torque limiters even have a compression adjustment that can be used to set the appropriate limit.
    Other types of torque limiters include a spring-loaded pawl-spring type, a ball detent type, and a synchronous magnetic type. A spring-loaded pawl-spring type can also be manually or automatically reset. A ball detent type may have several detent positions. A synchronous magnetic type may have more backlash than a mechanical type.\"limiter<\/p>\n

    Mach III friction torque limiter<\/h2>\n

    Basically a torque limiter is a device that protects the transmission from damage when the torque is pushed beyond a certain limit. This is achieved by preventing the torque from transmitting into the gearbox. The limiter is a small device that can be mounted on any shaft. If you are looking for a simple yet effective way to protect your investment, then you should consider a torque limiter.
    A friction torque limiter is a small device that transfers torque linearly in relation to the force applied to a set of discs. This is the simplest form of torque transfer and it is not difficult to install.
    A torque limiter is typically a small device that is mounted on the end of a shaft or in the output shaft of a gearbox. This device can be configured in a number of different ways. The most common configurations involve mounting the device on the end of the shaft. It can be positioned to rotate in both the clockwise and counterclockwise directions.
    A friction torque limiter is a small device that protects the transmission from damage when the torque is pushed beyond a certain limit. The limiter is a small device and it can be positioned to rotate in both the counterclockwise and clockwise directions. The limiter has a number of different mounting configurations, ranging from through-shaft to NEMA C-face. Regardless of the mounting method, the limiter is a small device that is easy to install.
    The torque limiter is the best and cheapest way to protect the transmission from damage. In the event of an overload, the device will disengage and disconnect the barrel from the gearbox. You can also get an overload detection system that monitors the output shaft rotation and signals the control system to shut down the motor.
    A torque limiter is a small device that can protect the transmission from damage when the torque is pumped beyond a certain limit. This is achieved through a combination of a drive hub and a set of discs. The discs are able to rotate in both the counterclockwise and the clockwise directions.<\/p>\n

    CZPT FT series torque limiter<\/h2>\n

    FT CZPT is a torque limiter made of stainless steel. The FT is a full-trough concave curve, full-pour casting emitter, with a standard 6 inch width and 250 watts of output. The limitator is protected by corrosion and a white glaze. It is also tamper-resistant, and pre-shimmed and pre-tested. It is available in a variety of colors.
    The FT CZPT torque limiter has a center member machined flat, with a sintered iron bushing that protects the hub of the limiter from slippage. The bolts are pre-shimmed at the factory, and they are pretested to ensure that the force is consistent. The spring cup bolts come in a variety of colors. A torque setting is pre-set in the factory, and the limiter is delivered ready to use. The FT CZPT torque limiter includes a chain coupling, and is available in a variety of torque limiters. If you have questions about this torque limiter, or are interested in ordering a limitator, you can contact the FT CZPT sales team.
    \"China\"China
    editor by CX 2023-05-06<\/p>","protected":false},"excerpt":{"rendered":"

    Product Description Product DescriptionWTZ A100N Overload limiter\u00a0can be in the form of Chinese characters, graphics, characters and so on comprehensive display the various parameters in the process of work.\u00a0As the main hook load, vice hook load, work boom Angle, length of boom, radius, etc.;\u00a0 \u25cbOverload\u00a0 Limiter\u00a0 Alarm function\u00a0Have sound and light alarm function: when the […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-1535","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/posts\/1535","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/comments?post=1535"}],"version-history":[{"count":0,"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/posts\/1535\/revisions"}],"wp:attachment":[{"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/media?parent=1535"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/categories?post=1535"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/limitertorque.com\/id\/wp-json\/wp\/v2\/tags?post=1535"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}