Tag Archives: shaft cover

China high quality Harvesters Rotavator Rotary Tiller Casting Yoke Tube Angle Joints Tractor Parts Cover Friction Pto Shaft with Shear Bolt Torque Limiter torque limiter calculation

Product Description

Harvesters Rotavator  Rotary Tiller Casting Yoke tube Angle Joints Tractor Parts Cover Friction Pto Shaft with Shear Bolt Torque Limiter

Power Take Off Shafts for all applications

A power take-off or power takeoff (PTO) is any of several methods for taking power from a power source, such as a running engine, and transmitting it to an application such as an attached implement or separate machines.

Most commonly, it is a splined drive shaft installed on a tractor or truck allowing implements with mating fittings to be powered directly by the engine.

Semi-permanently mounted power take-offs can also be found on industrial and marine engines. These applications typically use a drive shaft and bolted joint to transmit power to a secondary implement or accessory. In the case of a marine application, such shafts may be used to power fire pumps.

We offer high-quality PTO shaft parts and accessories, including clutches, tubes, and yokes for your tractor and implements, including an extensive range of pto driveline. Request our pto shaft products at the best rate possible.

What does a power take off do?

Power take-off (PTO) is a device that transfers an engine’s mechanical power to another piece of equipment. A PTO allows the hosting energy source to transmit power to additional equipment that does not have its own engine or motor. For example, a PTO helps to run a jackhammer using a tractor engine.

What’s the difference between 540 and 1000 PTO?

When a PTO shaft is turning 540, the ratio must be adjusted (geared up or down) to meet the needs of the implement, which is usually higher RPM’s than that. Since 1000 RPM’s is almost double that of 540, there is less “”Gearing Up”” designed in the implement to do the job required.”

If you are looking for a PTO speed reducer visit here 

Function Power transmission                                   
Use Tractors and various farm implements
Place of Origin HangZhou ,ZHangZhoug, China (Mainland)
Brand Name EPT
Yoke Type push pin/quick release/collar/double push pin/bolt pins/split pins 
Processing Of Yoke Forging
Plastic Cover YW;BW;YS;BS
Color Yellow;black
Series T series; L series; S series
Tube Type Trianglar/star/lemon
Processing Of Tube Cold drawn
Spline Type 1 3/8″ Z6; 1 3/8 Z21 ;1 3/4 Z20;1 1/8 Z6; 1 3/4 Z6; 

Related Products


Company information:


/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
US$ 38/Piece
1 Piece(Min.Order)

Request Sample

limiter torque

CZPT Torque Limiter Products

Whether you’re looking for a magnetic torque limiter or a permanent-magnet synchronous limiter, CZPT(r) has a torque limiter solution for you. In addition to these products, we also offer Roller-detent and Challenge torque limiters.

Over-torque limiters

During heavy duty high cycle operations, it’s critical to have the proper equipment for maintaining torque levels. Having the right torque limiters can protect your machine from damage and help to reduce the frequency of downtime and cost of repair.
Torque limiters work to prevent the buildup of rotational energy, which can cause mechanical overloads. The torque limiter system detects the overload and disconnects the drive from the driven components. When the torque level drops below the preset level, the device reengages.
Torque limiters are widely used in industrial and assembly line applications. They are used in manufacturing equipment such as industrial robots and printing and converting machines. They are also used in conveyors and woodworking machines.
There are many types of torque limiters available. The most common are mechanical and hydraulic. The mechanical torque limiters can be installed in a single point or multiple points in the machine. Hydraulic torque limiters are a compact option for accurate torque overload release. They also allow users to set a precise disengagement torque value.
Typically, these devices are adjustable with a single screw. For offset mounted systems, an external bearing may be required. Most quality torque limiters include a bearing between the base of the clutch and the output flange.
Mechanical torque limiters are available in a variety of sizes and designs. They can be used in virtually any application. They provide an integrated mechanical and electrical design.

Magnetic torque limiters

Using Magnetic Torque Limiters will increase the reliability and durability of your equipment. They also help prevent catastrophic failure, which is essential for preventing downtime. They are used in a wide range of applications, including printing and converting machines, woodworking machines, conveyors, and many more.
They are designed to disengage from the driven system when the torque load exceeds the design limit. This protects rotating equipment and machinery from torsional strain and other hazards. They are also designed to provide precise overload protection. Using a torque limiter can protect equipment through its entire life cycle. It may prevent a mechanism from failing or even prevent a workplace accident.
A torque limiter is typically packaged as a shaft coupling. It is also available in other forms, such as friction-plate couplings and magnetic particle couplings. It is also available in many different sizes. It is important to choose a torque limiter that is right for your needs. The design of the torque limiter must match the type of torque load generated.
They are used in a variety of applications, including speed and torque sensors, acceleration sensors, position sensors, and more. They also can be found in various counters, tachogenerators, scales, and measuring devices.
Magnetic torque limiters are lightweight, require no maintenance, and don’t suffer wear and fatigue. They also can be used at any temperature. They have a quick response time, and they can reduce the transmission of torsional vibrations.

Permanent-magnet synchronous torque limiters

Various types of torque limiters are available in the market. These include friction torque limiters, magnetic particle clutch torque limiters, and spring-loaded pawl-spring torque limiters. These devices are used to limit the torque transmitted from an input shaft to an output shaft. These devices reduce the force experienced by the drive train components and thus enhance the reliability of electromechanical actuators. They protect expensive components from damage and physical injury.
In a magnetic particle clutch torque limiter, a magnetic field is generated from current. This field is transmitted to an output shaft through a physical barrier or air gap between the magnetic field lines. Magnetic particles in the assembly lock into chains along the field lines. The torque generated is statically or dynamically set. The torque is proportional to the current passing through the windings.
Friction torque limiters are used in various applications such as robotics. These devices have a radial and axial design. They also utilize sensors to prevent overload. These devices are also used as shaft-to-shaft couplings. The torque density is good and the devices are easy to operate.
Permanent-magnet synchronous torque limiters are another type of torque limiters. This type uses twin discs with mated magnets on their faces. These devices are fast acting and provide quick response. They can also have backlash.
In a permanent-magnet synchronous torque limiter, the magnetic field is generated from an excitation source. This field then interacts with a PM field to generate torque.limiter torque

Roller-detent torque limiters

Whether you’re working on a manufacturing or processing line, it’s important to be aware of the various types of torque limiters and how they work. They can protect your equipment from overload and damage, and prevent physical injury to personnel. These devices can also be used in industrial robots, assembly lines, printing and converting machines, and conveyors.
Torque limiters can be mechanical, pneumatic, or electronic. Some systems have a single-position device, while others have a flexible coupling model that allows small parallel offsets and angular misalignments. Some systems also offer random reset devices.
Torque limiters are designed to protect expensive components from overloaded conditions. Modern machines have a predictable motion and torque, but unexpected forces can exceed their design limits. They can also eliminate physical injury by isolating driving and driven equipment from each other when overload occurs.
Mechanical torque limiters are available in a wide range of sizes and are designed for use in virtually any application. They are also backlash-free and offer superior repeat accuracy. They are ideal for processing different materials, and are suitable for applications such as woodworking.
Electronic torque limiters are less expensive than mechanical devices, and offer a more reliable control mechanism. They can apply pressure to thrust flanges and control the volume of air in the air chamber. They are commonly used in sheet metal processing equipment, printing and converting machines, and industrial robots.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is a custom-designed component that is used to transfer torque and axial force between mating components. The component can be used as a slip clutch and as a force limiter.
The tolerance ring may be made from metal, such as nickel-copper, spring steel, carbon steel, or copper-beryllium. The material may be heat-treated to provide the desired hardness and durability. The tolerance ring is typically curved to facilitate assembly. The tolerance ring can also be manufactured as an annular band.
The tolerance ring includes a generally cylindrical body. The body may be formed with a slit down the side. The body may also be constructed with one or more rows of projections. A tolerance ring is typically located between the inner component and the outer component. The tolerance ring transfers torque between the inner and outer components.
A tolerance ring may have an apex radius of no less than 1.01 RB. The base radius is measured perpendicularly from the ring’s central axis to the outer surface of the apex.
A tolerance ring may be arranged in a centered or piloted configuration. A centered configuration requires grooves in the bearing housing. A piloted configuration uses a step instead of a groove.
In a two-layer tolerance ring configuration, the first layer may include a plurality of radially extending projections. The second layer may include a smooth, regular surface. The two layers may overlap in some locations. When the layers overlap, the second layer may act as a sleeve around the inner component. The second layer may also act as a diffuser for transmitted force.limiter torque

Challenge torque limiters

Designed to optimize torque and speed in drive systems, the Challenge torque limiter is available in torque ranges of three to 1090 Nm. Using an array of spring loaded friction discs, Challenge torque limiters are capable of adjusting force to the tune of a small percentage of the total torque. Whether you need a pilot bored unit or a completely custom machined model, Challenge has the expertise and resources to ensure your requirements are met.
In fact, the company has the largest line of torque limiters in the world. These units are capable of supporting shaft diameters ranging from 9mm to 64mm. They are also able to provide reliable overload protection. Having a torque limiter mounted in your machine is the smartest decision you can make.
The company also offers a range of torque limiters that are specifically engineered to address the needs of industry sectors such as automotive, aerospace, and medical. Aside from torque limiters, the company also offers other product solutions such as servo motors, actuators and cylinders, and power transmission systems. The patented R+W torque limiter has a proprietary patented operational principle that can be adjusted to match the application and meet its intended use. They are also available in a variety of torque ranges, sizes, and capacities. They also offer a comprehensive warranty and service program. They have a plethora of applications in industrial robots, conveyor systems, assembly lines, and even printing and converting equipment.
China high quality Harvesters Rotavator Rotary Tiller Casting Yoke Tube Angle Joints Tractor Parts Cover Friction Pto Shaft with Shear Bolt Torque Limiter   torque limiter calculationChina high quality Harvesters Rotavator Rotary Tiller Casting Yoke Tube Angle Joints Tractor Parts Cover Friction Pto Shaft with Shear Bolt Torque Limiter   torque limiter calculation
editor by CX 2024-03-28

China best Pto Adaptor Cardan Spline Shaft Yoke Tube Torque Limiter Universal Joint Cover Agricultural Farm Machinery Tractor Pto Drive Shaft

Product Description

CE certified agricultural 6 spline PTO drive shaft


PTO drive shaft:

The PTO shaft (Power Take-Off shaft) is a mechanical component used to transfer power from a tractor or other power source to an attached implement such as a mower, tiller, or baler. The PTO shaft is typically located at the rear of the tractor and is powered by the tractor’s engine through the transmission.

The PTO shaft is designed to provide a rotating power source to the implement, allowing it to perform its intended function. The implement is connected to the PTO shaft using a universal joint, which allows for movement between the tractor and the implement while still maintaining a constant power transfer.

Product features:

1. CE and ISO certificates to guarantee to quality of our goods;
2.High quality steel raw materials, suitable hardness, not easy to break or deform.
3.Automatic temperature control system used on both heating treatment and tempering, to guaratee the products heated evenly, the outside and interior have uniform structure, so as to get longer work life.
4.Special gas used in tempering, to make up the chemical elements which lost during heating treatment, to double the work life than normal technology.
5. Precise and high strength moulds get precise shaping during thermo-forming.
6. The whole product body and shape has been adjusted precisely by mechanics to pass the balance test both in static and moving states.
7. Products use electrostatic painting or brand water-based paint, environment-protective, to get excellent surface and long time rust-protective. And drying process is added for liquid painting to improve the quality of the paint adhesion to blade surface.
8. Automatic shot peening surface treatment, excellent appearance.
9. Provide OEM & ODM Service.

Product Specifications:

Product details:

Packaging & Shipping:

Our commitments:

1.With us, your funds is safe.
2. At least 12 months warranty, quality inspection before shipment.
3. Factory direct supply farming machinery and support you earning more money.
4. Near the port, rapid production , on time delivery.
5. OEM available, providing customized feature machine to enlarge market share.
6.Affordable price, reliable quality, enjoys farming.

Company Profile:

Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of “quality first, customer first and credit-based” since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a CHINAMFG situation since the trend of economic globalization has developed with anirresistible force.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Pto Drive Shafts
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage
Material: 20crmnti
Power Source: Tractor
Weight: Customization
After-sales Service: Provide
US$ 35/Piece
1 Piece(Min.Order)




Can you explain the role of temperature and pressure in injection molding quality control?

Temperature and pressure are two critical parameters in injection molding that significantly impact the quality control of the process. Let’s explore their roles in more detail:


The temperature in injection molding plays several important roles in ensuring quality control:

1. Material Flow and Fill:

The temperature of the molten plastic material affects its viscosity, or flowability. Higher temperatures reduce the material’s viscosity, allowing it to flow more easily into the mold cavities during the injection phase. Proper temperature control ensures optimal material flow and fill, preventing issues such as short shots, flow marks, or incomplete part filling. Temperature control also helps ensure consistent material properties and dimensional accuracy in the final parts.

2. Melting and Homogenization:

The temperature must be carefully controlled during the melting process to ensure complete melting and homogenization of the plastic material. Insufficient melting can result in unmelted particles or inconsistent material properties, leading to defects in the molded parts. Proper temperature control during the melting phase ensures uniform melting and mixing of additives, enhancing material homogeneity and the overall quality of the molded parts.

3. Cooling and Solidification:

After the molten plastic is injected into the mold, temperature control is crucial during the cooling and solidification phase. Proper cooling rates and uniform cooling help prevent issues such as warping, shrinkage, or part distortion. Controlling the temperature allows for consistent solidification throughout the part, ensuring dimensional stability and minimizing internal stresses. Temperature control also affects the part’s crystallinity and microstructure, which can impact its mechanical properties.


Pressure control is equally important in achieving quality control in injection molding:

1. Material Packing:

During the packing phase of injection molding, pressure is applied to the molten plastic material to compensate for shrinkage as it cools and solidifies. Proper pressure control ensures that the material is adequately packed into the mold cavities, minimizing voids, sinks, or part deformation. Insufficient packing pressure can lead to incomplete filling and poor part quality, while excessive pressure can cause excessive stress, part distortion, or flash.

2. Gate and Flow Control:

The pressure in injection molding influences the flow behavior of the material through the mold. The pressure at the gate, where the molten plastic enters the mold cavity, needs to be carefully controlled. The gate pressure affects the material’s flow rate, filling pattern, and packing efficiency. Optimal gate pressure ensures uniform flow and fill, preventing issues like flow lines, weld lines, or air traps that can compromise part quality.

3. Ejection and Part Release:

Pressure control is essential during the ejection phase to facilitate the easy removal of the molded part from the mold. Adequate ejection pressure helps overcome any adhesion or friction between the part and the mold surfaces, ensuring smooth and damage-free part release. Improper ejection pressure can result in part sticking, part deformation, or mold damage.

4. Process Monitoring and Feedback:

Monitoring and controlling the temperature and pressure parameters in real-time are crucial for quality control. Advanced injection molding machines are equipped with sensors and control systems that continuously monitor temperature and pressure. These systems provide feedback and allow for adjustments during the process to maintain optimum conditions and ensure consistent part quality.

Overall, temperature and pressure control in injection molding are vital for achieving quality control. Proper temperature control ensures optimal material flow, melting, homogenization, cooling, and solidification, while pressure control ensures proper material packing, gate and flow control, ejection, and part release. Monitoring and controlling these parameters throughout the injection molding process contribute to the production of high-quality parts with consistent dimensions, mechanical properties, and surface finish.

What is the role of design software and CAD/CAM technology in optimizing injection molded parts?

Design software and CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) technology play a crucial role in optimizing injection molded parts. They provide powerful tools and capabilities that enable designers and engineers to improve the efficiency, functionality, and quality of the parts. Here’s a detailed explanation of the role of design software and CAD/CAM technology in optimizing injection molded parts:

1. Design Visualization and Validation:

Design software and CAD tools allow designers to create 3D models of injection molded parts, providing a visual representation of the product before manufacturing. These tools enable designers to validate and optimize the part design by simulating its behavior under various conditions, such as stress analysis, fluid flow, or thermal performance. This visualization and validation process help identify potential issues or areas for improvement, leading to optimized part designs.

2. Design Optimization:

Design software and CAD/CAM technology provide powerful optimization tools that enable designers to refine and improve the performance of injection molded parts. These tools include features such as parametric modeling, shape optimization, and topology optimization. Parametric modeling allows for quick iteration and exploration of design variations, while shape and topology optimization algorithms help identify the most efficient and lightweight designs that meet the required functional and structural criteria.

3. Mold Design:

Design software and CAD/CAM technology are instrumental in the design of injection molds used to produce the molded parts. Mold design involves creating the 3D geometry of the mold components, such as the core, cavity, runner system, and cooling channels. CAD/CAM tools provide specialized features for mold design, including mold flow analysis, which simulates the injection molding process to optimize mold filling, cooling, and part ejection. This ensures the production of high-quality parts with minimal defects and cycle time.

4. Design for Manufacturability:

Design software and CAD/CAM technology facilitate the implementation of Design for Manufacturability (DFM) principles in the design process. DFM focuses on designing parts that are optimized for efficient and cost-effective manufacturing. CAD tools provide features that help identify and address potential manufacturing issues early in the design stage, such as draft angles, wall thickness variations, or parting line considerations. By considering manufacturing constraints during the design phase, injection molded parts can be optimized for improved manufacturability, reduced production costs, and shorter lead times.

5. Prototyping and Iterative Design:

Design software and CAD/CAM technology enable the rapid prototyping of injection molded parts through techniques such as 3D printing or CNC machining. This allows designers to physically test and evaluate the functionality, fit, and aesthetics of the parts before committing to mass production. CAD/CAM tools support iterative design processes by facilitating quick modifications and adjustments based on prototyping feedback, resulting in optimized part designs and reduced development cycles.

6. Collaboration and Communication:

Design software and CAD/CAM technology provide a platform for collaboration and communication among designers, engineers, and other stakeholders involved in the development of injection molded parts. These tools allow for easy sharing, reviewing, and commenting on designs, ensuring effective collaboration and streamlining the decision-making process. By facilitating clear communication and feedback exchange, design software and CAD/CAM technology contribute to optimized part designs and efficient development workflows.

7. Documentation and Manufacturing Instructions:

Design software and CAD/CAM technology assist in generating comprehensive documentation and manufacturing instructions for the production of injection molded parts. These tools enable the creation of detailed drawings, specifications, and assembly instructions that guide the manufacturing process. Accurate and well-documented designs help ensure consistency, quality, and repeatability in the production of injection molded parts.

Overall, design software and CAD/CAM technology are instrumental in optimizing injection molded parts. They enable designers and engineers to visualize, validate, optimize, and communicate designs, leading to improved part performance, manufacturability, and overall quality.

How do injection molded parts compare to other manufacturing methods in terms of cost and efficiency?

Injection molded parts have distinct advantages over other manufacturing methods when it comes to cost and efficiency. The injection molding process offers high efficiency and cost-effectiveness, especially for large-scale production. Here’s a detailed explanation of how injection molded parts compare to other manufacturing methods:

Cost Comparison:

Injection molding can be cost-effective compared to other manufacturing methods for several reasons:

1. Tooling Costs:

Injection molding requires an initial investment in creating molds, which can be costly. However, once the molds are made, they can be used repeatedly for producing a large number of parts, resulting in a lower per-unit cost. The amortized tooling costs make injection molding more cost-effective for high-volume production runs.

2. Material Efficiency:

Injection molding is highly efficient in terms of material usage. The process allows for precise control over the amount of material injected into the mold, minimizing waste. Additionally, excess material from the molding process can be recycled and reused, further reducing material costs compared to methods that generate more significant amounts of waste.

3. Labor Costs:

Injection molding is a highly automated process, requiring minimal labor compared to other manufacturing methods. Once the molds are set up and the process parameters are established, the injection molding machine can run continuously, producing parts with minimal human intervention. This automation reduces labor costs and increases overall efficiency.

Efficiency Comparison:

Injection molded parts offer several advantages in terms of efficiency:

1. Rapid Production Cycle:

Injection molding is a fast manufacturing process, capable of producing parts in a relatively short cycle time. The cycle time depends on factors such as part complexity, material properties, and cooling time. However, compared to other methods such as machining or casting, injection molding can produce multiple parts simultaneously in each cycle, resulting in higher production rates and improved efficiency.

2. High Precision and Consistency:

Injection molding enables the production of parts with high precision and consistency. The molds used in injection molding are designed to provide accurate and repeatable dimensional control. This precision ensures that each part meets the required specifications, reducing the need for additional machining or post-processing operations. The ability to consistently produce precise parts enhances efficiency and reduces time and costs associated with rework or rejected parts.

3. Scalability:

Injection molding is highly scalable, making it suitable for both low-volume and high-volume production. Once the molds are created, the injection molding process can be easily replicated, allowing for efficient production of identical parts. The ability to scale production quickly and efficiently makes injection molding a preferred method for meeting changing market demands.

4. Design Complexity:

Injection molding supports the production of parts with complex geometries and intricate details. The molds can be designed to accommodate undercuts, thin walls, and complex shapes that may be challenging or costly with other manufacturing methods. This flexibility in design allows for the integration of multiple components into a single part, reducing assembly requirements and potential points of failure. The ability to produce complex designs efficiently enhances overall efficiency and functionality.

5. Material Versatility:

Injection molding supports a wide range of thermoplastic materials, providing versatility in material selection based on the desired properties of the final part. Different materials can be chosen to achieve specific characteristics such as strength, flexibility, heat resistance, chemical resistance, or transparency. This material versatility allows for efficient customization and optimization of part performance.

In summary, injection molded parts are cost-effective and efficient compared to many other manufacturing methods. The initial tooling costs are offset by the ability to produce a large number of parts at a lower per-unit cost. The material efficiency, labor automation, rapid production cycle, high precision, scalability, design complexity, and material versatility contribute to the overall cost-effectiveness and efficiency of injection molding. These advantages make injection molding a preferred choice for various industries seeking to produce high-quality parts efficiently and economically.

China best Pto Adaptor Cardan Spline Shaft Yoke Tube Torque Limiter Universal Joint Cover Agricultural Farm Machinery Tractor Pto Drive Shaft  China best Pto Adaptor Cardan Spline Shaft Yoke Tube Torque Limiter Universal Joint Cover Agricultural Farm Machinery Tractor Pto Drive Shaft
editor by CX 2024-02-23

Wide shop made in China – replacement parts – in Jubayl Saudi Arabia Angle Joint Tractor Pto Shaft Cover for Power Transmission with top quality

Wide  shop  made in China - replacement parts -  in Jubayl Saudi Arabia  Angle Joint Tractor Pto Shaft Cover for Power Transmission with top quality

We – EPG Team the biggest gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 different branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

820 Series The 820 Sequence has been created making use of the modular principle to accommodate large-torque, high- and reduced-pace apps with the versatility to accommodate a broad assortment of torque options.

Broad angle joint Tractor Pto Shaft Go over for Electricity Transmission
1. Tubes or Pipes
We’ve already acquired Triangular profile tube and Lemon profile tube for all the sequence we provide.
And we have some star tube, splined tube and other profile tubes necessary by our buyers (for a specific series). (Make sure you observe that our catalog doesnt include all the things we make)
If you want tubes other than triangular or lemon, make sure you supply drawings or photographs.

two.Conclude yokes
We’ve got numerous kinds of fast launch yokes and basic bore yoke. I will propose the normal kind for your reference.
You can also send out drawings or photos to us if you cannot discover your product in our catalog.

3. Protection units or clutches
I will attach the information of basic safety gadgets for your reference. We have currently have Cost-free wheel (RA), Ratchet torque limiter(SA), Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).

4.For any other more specific requirements with plastic guard, link strategy, coloration of portray, package deal, etc., please come to feel free of charge to enable me know.

one. We have been specialised in creating, producing drive shaft, steering coupler shaft, universal joints, which have exported to the United states of america, Europe, Australia and so on for years 
two. Software to all varieties of common mechanical situation 
three. Our items are of large depth and rigidity. 
four. Warmth resistant & Acid resistant 
5. EPT orders are welcomed

Our manufacturing facility is a top company of PTO shaft yoke and universal joint.

We manufacture higher quality PTO yokes for numerous vehicles, building machinery and products. All products are built with rotating lighter.

We are at the moment exporting our goods all through the world, especially to North The us, South The us, Europe, and Russia. If you are intrigued in any item, please do not hesitate to speak to us. We are bathroom ept ept to turning into your suppliers in the near future.


The use of first tools manufacturer’s (OEM) part figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our business and the listed replacement components contained herein are not sponsored, approved, or produced by the OEM.

Wide  shop  made in China - replacement parts -  in Jubayl Saudi Arabia  Angle Joint Tractor Pto Shaft Cover for Power Transmission with top quality

Wide  shop  made in China - replacement parts -  in Jubayl Saudi Arabia  Angle Joint Tractor Pto Shaft Cover for Power Transmission with top quality

Wide  shop  made in China - replacement parts -  in Jubayl Saudi Arabia  Angle Joint Tractor Pto Shaft Cover for Power Transmission with top quality