China manufacturer 8t Portal Lifting Container Gantry Crane Safety Device Overload Limiter torque limiter browning

Product Description

Product Description
WTZ A700 Overload limiter can be in the form of Chinese characters, graphics, characters and so on comprehensive display the various parameters in the process of work. 
As the main hook load, vice hook load, work boom Angle, length of boom, radius, etc.; 

Overload  Limiter  Alarm function 

Have sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system. 
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.

Overload Limiter protection function 
Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security. 

WTZ  A700 Load Moment Indicator(safe load indicator or Crane computer) is a device which is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the safe operating range. In some cases, the device will physically lock out the machinery in circumstances it determines to be unsafe. 

It controls the lifting equipment to function as per the manufacturer’s suggested safe load charts. Each of the measured parameters like load weight, working radius, control limit,angle and extension of the crane boom, etc will then further be displayed in the operator’s cabin.

 

WTZ A700  overload limiter system for terminal quayside crane 

 

 WTZ-A700 Safe  Load Indicator system( LMI ) 
1.WTZ A700 display/monitor (8inch color touch LCD screen ,must)
2.Data control  box(must)
3.Pin  type  Lod cell(must)
4.Wind speed  senosr(optional)
5.Encorder(optional)
6.Other  spare  parts…

Technical Parameters
 

Model: WTL-A700 Control Output: <= 5 Channels
Display:8 inch LCD System Composition Error: ±5%(F.S.)
Working Temperature: -20ºC~60ºC Power Comsumption:<35W
Operating Humidity: 95%RH(25ºC) Alarm Volume: >60db
Weight Measurement Range: 0T~999.9T IP Grade: IP 64
Resolving Ability: 0.1T Power Supply: AC220V±10%
Singal Input: <= 6 Channels Application:terminal container  crane&portal  crane

Installation Cases 

Certifications

Company Information

Weite Technologies Co.,Ltd

Founded in 2002, it is national hi-tech enterprise located in HangZhou, China. It has been focusing on R&D and OEM manufacturing of lifting safety protection devices such as Load Moment Indicator, Safe monitoring systems, overload limiter, Load cell, Anemometers etc.We continuously concentrate on ensuring lifting equipments run safely as long-term pursuing goal. 

“The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps” . Nowadays, WTAU products are widely used in marine industry,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been wide spreaded to over 60 countries and regions.

FAQ

1) Is your company well-reputated? How to prove that?

It is a China Top 3 brand focusing on Crane Safety Protection Equipment. We are also Safety Partners for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(top 45), Big Crane(top 94) and Top 500 companies such as ABB, Macgragor,TTS,CNOOC,etc. Products are been sold to over 60 countries and regions globally. 
 

2) How to assure the quality?

The Product Warranty for the total item is 12 months. Any problem after installation, we will change the new 1 for free.

 

3) How to install the LMI?

English User Manual(include all the details of each item) will be offered for installation and trouble shooting(refer to the pic below). Also free Remote Instant Technical assistance would be offered by our english engineers. Or we can send our engineers to assist you locally.

 

4) How much is your LMI system?

Send me the crane model, hook number, working conditions(Luffing Tower Working Condition, Pilling) and special requirement and the like. Your contact info is a must.

 

5) How can I place order? 
A: You can contact us by email about your order details, or place order on line.

 

6) How can I pay you?

A: After you confirm our PI, we will request you to pay. T/T and Paypal, Western Union are the most usual ways we are using. 

Related Products

 

Task: Adjust
Structure: Combination
Mathematical Model: Linear
Signal: Continuous
Function: Automatic Control, Protection, Monitoring, Measurement, Alarming
Certification: ISO: 9001, CE
Customization:
Available

|

Customized Request

limiter torque

CZPT(R) Tolerance Ring For Limiter Torque

Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.limiter torque

CZPT TL

TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.limiter torque

IWIS FT series

FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.

TL-IT inline

TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.
China manufacturer 8t Portal Lifting Container Gantry Crane Safety Device Overload Limiter   torque limiter browningChina manufacturer 8t Portal Lifting Container Gantry Crane Safety Device Overload Limiter   torque limiter browning
editor by CX 2023-11-13